@article {bnh-8372, title = {Physics-based simulations of grassfire propagation on sloped terrain at field scale: flame dynamics, mode of fire propagation and heat fluxes}, journal = {International Journal of Wildland Fire}, year = {2023}, month = {01/2023}, abstract = {

The interaction of wind and fire on a sloped terrain is always complex owing to the mechanisms of heat transfer and flame dynamics. Heating of unburned vegetation by attached flames may increase the rate of spread. The relative intensities of convective and radiative heat fluxes may change fire behaviour significantly. This paper presents a detailed analysis of flame dynamics, mode of fire propagation and surface radiative and convective heat fluxes on sloped terrain at various wind speeds using physics-based simulations. It was found that with increasing slope angles and wind velocity, the plume inclines more towards the ground and becomes elongated in upslope cases, whereas in downslope cases, the plume rises from the ground earlier. For higher wind velocities, the flame and near-surface flame dynamics appear to show rising, even though the plume is attached. The flame contour results indicate that the near-surface flame dynamics are difficult to characterise using Byram{\textquoteright}s number. A power-law correlation was observed between the simulated flame lengths and fireline intensities. The convective heat fluxes are more relevant for wind-driven fire propagation and greater upslopes, whereas both fluxes are equally significant for lower driving wind velocities compared with higher wind velocities.

}, keywords = {Byram number, fire propagation, flame, grassfire, heat fluxes, plume, rate of spread (RoS), slope, wind velocity}, doi = {https://doi.org/10.1071/WF21125}, url = {https://www.publish.csiro.au/wf/WF21125$\#$FN1}, author = {Jasmine Innocent and Duncan Sutherland and Nazmul Khan and Khalid Moinuddin} } @article {bnh-8375, title = {Physics-based simulations of grassfire propagation on sloped terrain at field scale: motivations, model reliability, rate of spread and fire intensity}, journal = {International Journal of Wildland Fire}, year = {2023}, month = {01/2023}, abstract = {

This study focuses on physics-based modelling of grassfire behaviour over flat and sloped terrains through a set of field-scale simulations performed using the Wildland{\textendash}urban Interface Fire Dynamics Simulator (WFDS), with varying wind speeds (12.5, 6 and 3 m s-1) and slope angles (-30{\textdegree} to +30{\textdegree}). To ensure the accuracy of this Large Eddy Simulation (LES), a sensitivity study was carried out to select the converged domain and grid sizes. Fire isochrones, locations of fire front, dynamic and quasi-steady rates of spread (RoS), and fire intensity results from the simulations are presented. Within the simulations conducted, the RoS and fire intensity were found to be higher with increasing slope angles, as well as with wind velocity. RoS comparisons are made with various empirical models. At different slope angles and driving wind velocities, different empirical quasi-steady RoS broadly match with particular dynamic maximum, minimum and averaged RoS values from this study. It appears that the ideal nature of grassfire propagation simulation and challenges related to measuring quasi-steady values in experimental studies are likely reasons for the observed differences. Additionally, for lower wind velocities, the RoS{\textendash}fire intensity relationship (Byram{\textquoteright}s) deviates from linearity for greater upslopes.

}, keywords = {Fire behaviour, fire front, grass fire, intensity, rate of spread (RoS) of fire, simulations, slope, wind speed}, doi = {https://doi.org/10.1071/WF21124}, url = {https://www.publish.csiro.au/wf/WF21124}, author = {Jasmine Innocent and Duncan Sutherland and Nazmul Khan and Khalid Moinuddin} } @article {BF-4272, title = {Environmental assessment of erosion following prescribed burning in the Mount Lofty Ranges, Australia}, journal = {International Journal of Wildland Fire}, year = {2013}, month = {10/2013}, abstract = {Erosion following fire has the potential to affect water quality, alter soil profiles and detrimentally affect human infrastructure. There is a clear need for environmental assessments to have regard for erosion concerns from prescribed burning. This study focussed on 10 prescribed burns conducted in the Southern Mount Lofty Ranges. Generalised additive modelling was used to determine the main significant environmental variables influencing the presence of sediment movement at 505 field-assessed sites. Sediment movement after the 10 prescribed burns was minor. Fire severity was a highly significant environmental determinant for the presence of sediment movement after prescribed burning. To predict erosion concerns, a suite of environmental variables is more reliable than focusing solely on slope steepness, as occurred before this study. These results indicate that erosion assessments need to consider a range of environmental variables to assess potential erosion and that land managers and scientists need to incorporate spatial sampling designs into erosion assessments.}, keywords = {bioturbation, erosion assessment, fire severity, rainfall, sediment movement, slope, topography}, doi = {http://dx.doi.org/10.1071/WF13011}, url = {http://www.publish.csiro.au/paper/WF13011.htm}, author = {Morris, Rowena and Ross Bradstock and Deirdre Dragovich and Henderson, M. K. and Trent Penman and Bertram Ostendorf} }